Physical hardware components for ESPHome projects
Showing 0 devices Clear All
See an interactive comparison of all displays showing their relative sizes and specifications.
See an interactive comparison of all development boards showing their relative sizes and specifications.
11x7 white LED matrix, individually addressable by Pimoroni
315MHz RF wireless transmitter and receiver module pair
5x5 RGB LED matrix, individually addressable by Pimoroni
8x8 Red and Green LED matrix display module
16-bit I2C Digital-to-Analog Converter
Educational microcontroller board with built-in sensors and NeoPixels
Addressable RGB LED strips and modules with WS2812/WS2812B chips
Mini PIR motion sensor module with low power consumption
I2C temperature and humidity sensor module
240x240 TFT Color display with ST7789 driver and 2 buttons
Ambient Light and Proximity Sensor
DFRobot Beetle ESP32-C6 Development Board
RGB, Ambient Light, Proximity and Gesture Sensor
Digital temperature and humidity sensor module
5 buttons and RGB LED using i2c I/O expander by Pimoroni
1-Wire digital temperature sensor
RTC module with battery backup for timekeeping
TTL/UART to Ethernet converter with Modbus gateway support
2.8" TFT LCD touchscreen shield with SD card socket
Minimal ESP8266 WiFi module with basic GPIO
Tenstar Robot ESP32-C3 Super Mini Development Board
ESP32-C3 RISC-V module with WiFi and Bluetooth LE
Popular ESP32 development board with built-in WiFi and Bluetooth
Compact ESP8266 development board with built-in WiFi
IR flame detection sensor module for fire detection
1Gbit SPI Serial SLC NAND Flash
Round RGB TFT LCD display (240x240) with GC9A01 driver
Ultrasonic ranging module for distance measurement
Passive infrared motion detection sensor module
0.96" OLED Display Module (128x64) with SSD1315 driver - I2C or SPI
ESP32 development board with 2.8-inch 240x320 LCD, capacitive touchscreen, WiFi and Bluetooth
Omnidirectional MEMS I2S microphone module
Character-based LCD display with HD44780 controller
Rotary encoder with PCA9956B 24-channel I2C LED driver
0.96" OLED Display Module (128x64) - I2C - SSD1306
Adafruit MCP4728 Quad DAC with EEPROM
Combustible gas and smoke detection sensor module
650nm red laser diode transmitter module
MCP4725 Breakout Board - 12-Bit DAC w/I2C Interface
2.4GHz wireless RF transceiver module for long-range communication
Infrared line tracking sensor for path following
8-bit I2C I/O expander for GPIO expansion
Spiral Nebula of 18 colored LEDs by Pimoroni
Infrared obstacle detection and avoidance sensor module
0.96" SPI Colour LCD (160x80) Breakout
Piezoelectric buzzer with built-in oscillator
Light-dependent resistor (LDR) analog light sensor module
Water detection sensor for rain and moisture sensing
16-bit I2C I/O expander for GPIO expansion
Magnetic proximity sensor switch
RP2040-based microcontroller board with WiFi and Bluetooth
Mechanical rotary encoder for input control
Microphone sound detection sensor with digital and analog output
12 RGB LED Ring
Mini PIR motion sensor with adjustable sensitivity
1.3" OLED Display Module (128x64) with SH1106 driver - I2C
1.12" Mono OLED (128x128, white/black) Breakout - SPI by Pimoroni
NFC/RFID Dynamic Tag with I2C interface and 16Kbit EEPROM
SPI 2.0" Display Module (240x320)
SPI Micro SD card module for external storage
Touch pHAT with 6 touch pads and 6 LEDs by Pimoroni
Ball-type tilt switch sensor for angle detection
SW-420 vibration detection sensor module
128Mbit (16MB) SPI NOR Flash Memory
Hardwired TCP/IP Ethernet controller with SPI interface
ESP32-C3 development board with 0.96" OLED display, audio codec, amplifier, microphone, and speaker
Resistive soil moisture detection sensor with analog output
8x4 RGB LED matrix HAT for Raspberry Pi Zero by Pimoroni
